• 000 Plain 455x160 Brass Wire Vent

455 x 160 mm vent, with decorative 11mm x 11mm crimped brass wire mesh, Hi flow static vents. They give 23,800 Sq mm of ventilation per vent.

 The Australian Building code 3.4.1 deals with sub-floor ventilation. There are 3 climate zones, Zone 1 is central Australia and requires 2,000 sqmm of ventilation per linear metre of external wall, using Aleta 455 x 160 vents in Zone 1 would mean spacings at 11.9 metres. Zone 2 is in land Australia and requires 4,000 sqmm of ventilation per linear metre of external wall, using Aleta 455 x 160 vents in Zone 2 would mean spacings at 6.0 metres. Zone 3 is coastal Australia and requires 6,000 sqmm of ventilation per linear metre of external wall, using Aleta 455 x 160 vents in Zone 3 would mean spacings at 4.0 metres.

It should be noted that extra ventilation may be required if : excessively damp sub-floor or if all walls can't be ventilated.

Vents should be placed no more than 600mm from corners and evenly spaced around the building.

Write a review

Note: HTML is not translated!
    Bad           Good

000 Plain 455x160 Brass Wire Vent

  • Product Code: 000 Plain 455x160 Brass Wire Vent
  • Availability: In Stock
  • $30.00


Related Products

Tags: cement concrete brass vent static hiflow mesh terracotta wall aleta air brick